技术支持:0755-88856228
技术解决方案 所在位置:首页 >> 技术解决方案 >> Sun 4800外接D240不能从光驱启动

Sun 4800外接D240不能从光驱启动

出处:www.sun1860.com  分类:技术解决方案  发布:2017/10/31 13:44:23  阅读:(841)
摘要:

Sun 4800外接D240不能从光驱启动(页 1) - Sun Solaris - 中国UNIX用户论坛 - Powered by Discuz! Archiver中国UNIX用户论坛''''s Archiver Oracle DBA 不抛弃 不放弃中国UNIX用户论坛 ? Sun Solaris ? Sun 4800外接D240不能从光驱启动猪小莱 发表于 2008-10-7 11:40Sun 4800外接D240不能从光驱启动在给一台E6900重装系统的时候,遇到了不能从光驱启动的问题,在网上找到了这篇文章,解决了问题。以下为转载的内容:今天安装一台Sun 4800操作系统Solaris9。插入光盘后在OK提示符下boot cdrom报错,说找不到boot device到Sun网站上去看了看,找到了解决方案(感觉明明就是一个bug):Document Audience:PUBLICDocument ID:71504Title:"ERROR: Can''''t open boot device" booting CDROM or disk with Sun[TM] Dual FastEthernet / Dual SCSI PCI CardSynopsis:"ERROR: Can''''t open boot device" booting CDROM or disk with Sun[TM] Dual FastEthernet / Dual SCSI PCI CardUpdate Date:Thu Sep 23 00:00:00 MDT 2004Products:Sun Fire 6800 Server, Sun Fire 4810 Server, Sun Fire 4800 Server, Sun Fire 3800 Server, Sun Fire E25K Server, Sun Fire E20K Server, Sun Fire 15K Server, Sun Fire 12K Server, Sun Fire V1280 Server, Sun Fire E2900 Server, Sun Fire E4900 Server, Sun Fire E6900 ServerTechnical Areas:Boot, SCSI Host Bus Adapter (HBA), SCSI (Small Computer System Interface), OBP (OpenBoot PROM)Keyword(s):cauldronProblem Statement:A system is unable to boot CDROM or disk after configuring the boot alias of the DVD-Rom or disks of a D240 like a regular CDROM or disk connected to a SCSI card.The probe-scsi-all command shows the DVD-ROM at /ssm@0,0/pci@1d,700000/pci@1/scsi@2,1 at target 6, LUN 0, and shows the disks at /ssm@0,0/pci@1d,700000/pci@1/scsi@2,1 at targets 0 and 1.ok boot /ssm@0,0/pci@1d,700000/pci@1/scsi@2,1/sd@6,0:f ERROR: Can''''t open boot-device ok boot /ssm@0,0/pci@1d,700000/pci@1/scsi@2,1/sd@0,0:fERROR: Can''''t open boot-deviceResolution:The Sun Dual FastEthernet / Dual SCSI PCI Card uses "disk@X,X" instead of "sd@X,X" for its OpenBoot PROM (OBP) driver name. Some users may be confused by this, as they assume that the OBP driver name will always be the same as the Solaris driver name. This is not the case.When running the ''''format'''' command from Solaris, it reports the device path as "sd@X,X". This also adds to the confusion, as it is using the Solaris driver name in the device path.The correct method to allow for a successful boot is to use the device path as reported by the OpenBoot PROM (OBP), using the "show-disks" command. It should be noted that the show-disks command does not report the device SCSI Target and LUN details. Target and LUN details can be obtained from the "probe-scsi-all" command. This means you will need to add something like "@X,X" to the end of the device path supplied by "show-disks".For example:ok probe-scsi-all../ssm@0,0/pci@1d,700000/pci@1/scsi@2,1Target 0 Unit 0 Disk FUJITSU MAP3367N SUN36G 0401Target 1 Unit 0 Disk FUJITSU MAP3367N SUN36G 0401Target 2 Unit 0 Processor Sun D240 1.09Target 3 Unit 0 Processor Sun D240 1.09Target 4 Unit 0 Removable Tape HP C5683A C005Target 6 Unit 0 Removable Read Only device TOSHIBA DVD-ROM SD-M17111005..ok show-disksa) /pci@3d,700000/pci@1/scsi@2,1/diskb) /pci@3d,700000/pci@1/scsi@2/diskc) /pci@1d,700000/pci@1/scsi@2,1/diskd) /pci@1d,700000/pci@1/scsi@2/diskq) NO SELECTIONEnter Selection, q to quit: qUsing this information, and the Target / LUN details obtained from a probe-scsi-all, you can now construct the correct device path to boot from.ok reset-allok boot /ssm@0,0/pci@1d,700000/pci@1/scsi@2,1/disk@6,0:fNOTE: Make sure that you execute ''''reset-all'''' before ''''boot'''' with "disk@X,X" at the end of the device path, otherwise you may not be able to boot and get the error: Data MMU Miss. Using "reset-all" will avoid the following scenario:ok boot /ssm@0,0/pci@1d,700000/pci@1/scsi@2,1/sd@6,0:f ERROR: Can''''t open boot-deviceok boot /ssm@0,0/pci@1d,700000/pci@1/scsi@2,1/disk@6,0:f Data MMU MissWhilst this issue is most frequently encountered on the D240, as it is most frequently used boot storage for the Sunfire Midrange series of servers, the problem is not unique to the D240. This misconfiguration error can be seen on virtually any storage that can be connected to the Sun[TM] Dual FastEthernet / Dual SCSI PCI Card (e.g Sun StorEdge S1).The most important thing to remember is that, regardless of the controller type, the paths as reported by "show-disks" at the OBP are the paths you need to use when booting.本文来自ChinaUnix博客,如果查看原文请点:[url]http://blog.chinaunix.net/u/3523/showart_1210631.html[/url]marie 发表于 2008-10-7 13:10路过,只留下脚印而已…… 页: [1] 查看完整版本: Sun 4800外接D240不能从光驱启动Powered by Discuz! Archiver 7.2 © 2001-2009 Comsenz Inc.

联系方式
联系方式 深圳市众联达科技有限公司

电话:0755-88856228

手机:15889329885

传真:0755-29578940

Q Q:点击这里给我发消息

地址:深圳市龙华新区和平西路龙军工业区17栋401

深圳市众联达科技有限公司   版权所有:深圳市众联达科技有限公司  深圳市众联达科技有限公司
电话:086-0755-88856228    网址:www.sun1860.com 
地址:深圳市龙华新区和平西路龙军工业区17栋401    ICP备案号:粤ICP备16103267号-1
主营业务: SUN服务器 sun工作站 sun硬盘 sun内存 sun租赁 sun报价 sun维保